MicaSense Sensor parameters for DJI GS Pro

For MicaSense sensor users that are not using the Skyport mount with the M200 series drones, you can still use DJI GS Pro as a flight planner but some extra set up is involved. Since the app will not recognize the camera, you will need setup the camera to use an automatic triggering mode and add the following camera specification to the "custom camera" section:

DJI_GS_Pro_Custom_Settings.png

 

MicaSense Sensor Parameters:

Camera Name RedEdge-M/MX Altum
Sensor Res. Width 1280 2064
Sensor Res. Height 960 1544
Sensor Width 4.8 7.12
Sensor Height 3.6 5.33
Focus Length 5.4 
35mm Equivalent OFF OFF
Min Shutter Intv. 1 1
Max Shutter Intv. 2 2

 

It is also very important to set the appropriate overlap percentage on the advanced tab. The overlap percentage should match what you used in RedEdge's overlap mode settings (we recommend a value of 75%):

 

Screen_Shot_2018-09-13_at_10.43.01_AM.png

 

 

Have more questions? Submit a request