MicaSense Sensor parameters for DJI GS Pro

At this time, users must still set the camera to trigger automatically, as DJI GS Pro cannot trigger the camera. However, it can still create a useful flight plan using these parameters in the "custom camera" section:

DJI_GS_Pro_Custom_Settings.png

 

MicaSense Sensor Parameters:

Camera Name RedEdge-M/MX Altum
Sensor Res. Width 1280 2064
Sensor Res. Height 960 1544
Sensor Width 4.8 7.12
Sensor Height 3.6 5.33
Focus Length 5.4 
35mm Equivalent OFF OFF
Min Shutter Intv. 1 1
Max Shutter Intv. 2 2

 

It is also very important to set the appropriate overlap percentage on the advanced tab. The overlap percentage should match what you used in RedEdge's overlap mode settings (we recommend a value of 75%):

 

Screen_Shot_2018-09-13_at_10.43.01_AM.png

 

 

Have more questions? Submit a request