1. Turn Sequoia on by connecting the multispectral sensor USB device port to a drone or a USB battery.
2. Make sure that the Wi-Fi appears in the list of available Wi-Fi networks. If not, press the multispectral button four times. The multispectral sensor indicator light flashes blue when Wi-Fi is enabled.
3. Connect your computer, tablet or smartphone to the Wi-Fi network: Sequoia_XXXX. If a password is required, enter the network name exactly as it appears (for example: Sequoia_026).
4. Open your internet browser and log on to the IP address http://192.168.47.1