RedEdge: How do I calibrate the magnetometer?

Power on your system (aircraft, camera, DLS, GPS)

NOTE: The magnetometer is located in the GPS unit. 

Connect to the RedEdge WiFi and web configuration

Press the settings button

Open the DLS Configuration

Under "Calibrate DLS Mag", press Start

For each of the six sides (top, bottom, left, right, front, back), turn that side up and slowly turn your system 360 degrees.

Press the stop button.

You should see the message: "Calibration Successful". If you receive a failure message, repeat the calibration process.


Have more questions? Submit a request